Call us on 0844 357 7252 (All calls are local rate)

Jump to the navigation

Fire Suppression Systems

Inert Gas Systems

The ‘Inert Gas’ is a gas of the air which has the capacity to be able to treat a fire hazard in open spaces. It is an inert gas, nonconductive, colourless, odourless and flavourless. Is no corrosive and may be used at normal temperatures with such materials as nickel, steel, stainless steel, copper, brass, bronze and plastics.

Synthetic Gas Systems

because Synthetic not electrical conductive, (but it is odourless and colourless) it is effective in the protection of electrical hazards, such as computer rooms.

FM-200® Fire Suppression

FM-200® extinguishing agent is a clean gas widely accepted as a substitute to Halon. Because FM-200® is not electrical conductive, (but it is odourless and colourless), it is effective in the protection of electrical hazards, such as computer rooms.

CO2 Gas Systems

CO2 has been used effectively for many years, not only in fire protection but also in other commercial applications. Although the use of CO2. As extinguishing agents declined with the introduction of halons, it is still widely used for fire protection.

Water Mist Systems

High Pressure Water mist system AQUAFOG® optimises the quantity of water used, maximising effective water volume by means of distribution of droplets of very tiny size, which produce a cooling effect.

Hypoxic Air

Hypoxic systems operate totally automatically under microprocessor control. Oxygen level in the protected space(s) is continuously monitored, and in most applications, the system will maintain the oxygen percentage between 14.5% and 15.5%.

we are proud to be trusted members of Construction Line, NIC EIC Approved contractors, BritishStandards KM 601093, Trust Mark, UKAS, SSAIB.